Heat Shrink Tubing
FEP heat shrink sleeving
FEP heat shrink offers a maximum continuous working temperature of 200°C, and a shrinking temperature of only 110°C.
Our high temperature heat shrink sleeving in FEP can be safely shrunk over temperature sensitive materials, without causing damage. Couple this property with its transparency, complete chemical resistance, total UV resistance, and non-stick nature and you have a unique material.
FEP heat shrink sleeving is available in many standard sizes, from 1.5mm to 150mm ID, and in different wall thicknesses, from standard to thin and heavy wall. Find our FEP Heat Shrink Sleeving Sizes. Select the correct size sleeve by allowing a generous amount of shrinkage, rather than using a tight sleeve if possible.
FEP heat shrink sleeving needs 110°C, so the gun temperature should be at least 200°C. We can supply a suitable heat gun for use with all our fluoropolymer heat shrink.
FEP Heat Shrink Unique Properties
-
Virtual total chemical and solvent resistance
-
Working temperature from -200°C to +200°C
-
Remains flexible at cryogenic temperatures
-
Very low coefficient of friction
-
Non-stick surface
-
Extremely high electrical resistance
-
Very low dielectric loss at high frequencies
-
Total resistance to UV radiation
-
Non-inflammable
-
Non-toxic
FEP Heat Shrink Applications
Applications for FEP heat shrink are very varied and include:
-
Cable jackets
-
Hose protection
-
Electrical terminal insulation
|
Adtech Part No
|
Supplied ID (mm)
|
Recovered ID (mm)
|
Wall Thickness (mm)
|
|---|---|---|---|
| FHS1.0 | 1.50 | 1 | 0.30 |
| FHS1.1 | 1.60 | 1.10 | 0.25 |
| FHS1.5 | 2 | 1.50 | 0.30 |
| FHS1.9 | 2.50 | 1.90 | 0.30 |
| FHS2.7 | 3.60 | 2.70 | 0.20 |
| FHS3 | 4.20 | 3 | 0.50 |
| FHS3.6 | 4.80 | 3.60 | 0.27 |
| FHS4.6 | 6.20 | 4.60 | 0.30 |
| FHS6 | 8 | 6 | 0.30 |
| FHS7 | 9.50 | 7 | 0.50 |
| FHS9 | 12 | 9 | 0.50 |
| FHS10 | 13.50 | 10 | 0.50 |
| FHS11 | 15 | 11 | 0.50 |
| FHS13 | 18 | 13 | 0.50 |
| FHS14 | 19 | 14 | 0.50 |
| FHS16 | 22 | 16 | 0.50 |
| FHS19 | 25 | 19 | 0.50 |
| FHS23 | 31 | 23 | 0.50 |
| FHS27 | 36 | 27 | 0.50 |
| FHS32 | 43 | 32 | 0.50 |
| FHS40 | 54 | 40 | 0.50 |
| FHS46 | 62 | 46 | 0.50 |
| FHS56 | 76 | 56 | 0.50 |
| FHS65 | 85 | 65 | 0.50 |
| FHS80 | 96 | 80 | 0.50 |
| FHS95 | 115 | 95 | 0.50 |
| FHS113 | 150 | 113 | 0.70 |
| Adtech Part No | Supplied ID (mm) | Recovered ID (mm) | Wall Thickness (mm) |
|---|---|---|---|
| FHS1.3 | 1.80 | 1.30 | 0.15 |
| FHS2.0 | 2.60 | 2 | 0.20 |
| FHS2.6 | 3.40 | 2.60 | 0.10 |
| FHS3.8L | 5.10 | 3.80 | 0.25 |
| FHS5.5L | 7.40 | 5.50 | 0.25 |
| FHS7.5L | 10.20 | 7.50 | 0.25 |
| FHS9.5L | 12.80 | 9.50 | 0.25 |
| FHS13L | 18 | 13 | 0.25 |
| FHS16L | 22 | 16 | 0.25 |
| FHS19L | 25 | 19 | 0.25 |
| FHS23L | 31 | 23 | 0.25 |
| FHS27L | 36 | 27 | 0.25 |
| FHS32L | 43 | 32 | 0.25 |
| FHS39L | 53 | 39 | 0.25 |
| FHS46L | 62 | 46 | 0.25 |
|
Adtech Part No
|
Supplied ID (mm)
|
Recovered ID (mm)
|
Wall Thickness (mm)
|
|---|---|---|---|
| FHS23H | 31 | 23 | 1.50 |
| FHS37H | 50 | 37 | 1.50 |
| FHS49H | 66 | 49 | 1.50 |
| FHS61H | 82 | 61 | 1.50 |
| FHS74H | 100 | 74 | 1.50 |
| FHS98H | 132 | 98 | 1.50 |