UltraFit© heat shrinkable roll covers are designed to enable our clients to install larger diameter sleeves over their rollers in house.
Once heated these ‘UltraFit©’ sleeves perform in a different manner to our standard ‘ARC’ FEP and PFA roll cover sleeves, as they do not extend in length as they recover in diameter. Whereby, ensuring a perfect ‘shrink fit’ over the roller.
This enables the process to be carried out by less experienced installers, improves the application time, and reduces scrap due to the incorrect application of sleeves.
This style roll cover sleeve is available in sizes from 21mm to 350mm ID and are made to order. Find our UltraFit© Fluoropolymer Roll Covers Sizes. For sizes below 21mm ID, see our FEP Heat Shrink Sleeving Range.
We are also able to custom manufacture virtually any size for special applications in single quantities.
If the FEP roll covers are to be bonded to the roller, the inside surface needs an etching treatment to make it bondable.
The chemical etching process is normally carried out to order on FEP roll covers that are held in stock. Find out more about our Fluoroplastic Chemical Etching Service.
Highly non-stick/release surface
Designed for use on curved (banana) stretch rollers
Fast & easy replacement
Less maintenance
Available in FEP and PFA resins
Extremely high working temperature of 200 °C or 250 °C
Adtech Part No
|
Supplied ID (mm)
|
Recovered ID (mm)
|
---|---|---|
ARC/UF/16 | 21 | 16 |
ARC/UF/19 | 25 | 19 |
ARC/UF/23 | 27 | 23 |
ARC/UF/27 | 34 | 27 |
ARC/UF/32 | 41 | 32 |
ARC/UF/40 | 50 | 40 |
ARC/UF/46 | 60 | 46 |
ARC/UF/56 | 67 | 56 |
ARC/UF/65 | 81 | 65 |
ARC/UF/80 | 91 | 80 |
ARC/UF/100 | 116 | 95 |
ARC/UF/125 | 148 | 113 |
ARC/UF/150 | 174 | 130 |
ARC/UF/175 | 180 | 150 |
ARC/UF/200 | 203 | 177 |
ARC/UF/225 | 241 | 204 |
ARC/UF/250 | 266 | 242 |
ARC/UF/300 | 315 | 266 |
ARC/UF/350 | 350 | 315 |
Used in the food and drink, automotive, medical and printing industries, FEP and PFA roll covers eliminate sticky build-up problems with rollers used in hot or cold applications.
We were contacted by an equipment supplier of steel brake discs to the auto industry in Australia. They needed a non-stick coating for their stainless-steel rollers.