Heat Shrink Tubing
ptfe/ FEP dual wall heat shrink sleeving
PTFE/ FEP dual wall heat shrink consists of a heat shrinkable PTFE sleeving with an inner FEP wall.
The unique properties of the dual wall heat shrink sleeving lends its utilisation in any application that requires a high working temperature, non-stick surface, high electrical resistance and chemical resistance.
With PTFE/ FEP dual wall heat shrink, it is possible to ‘pot’ components in pure fluoroplastic and protect them against mechanical and chemical exposure, even in immersed conditions.
PTFE/ FEP dual wall heat shrink sleeving is available in standard sizes, from 0.9mm to 11mm ID. Find our PTFE/ FEP Dual Wall Heat Shrink Sleeving Sizes.
PTFE/ PFA Dual Wall Heat Shrink
For higher temperature applications, PTFE heat shrink sleeving with an inner wall of PFA is recommended.
This is available to special order.
PTFE/ FEP Dual Wall Heat Shrink Sleeving Sizes
| Adtech Part No | Supplied ID (mm) | Recovered ID (mm) | Wall Thickness (mm) |
|---|---|---|---|
| FIP19T | 0.90 | 0.00 | 0.60 |
| FIP16T | 1.50 | 0.00 | 0.60 |
| FIP14T | 2.20 | 0.50 | 0.60 |
| FIP13T | 2.70 | 1.00 | 0.60 |
| FIP12T | 3.20 | 1.40 | 0.60 |
| FIP10T | 4.00 | 1.50 | 0.60 |
| FIP09T | 4.50 | 1.60 | 0.60 |
| FIP08T | 5.00 | 2.00 | 0.60 |
| FIP06T | 6.50 | 3.50 | 0.60 |
| FIP04T | 8.50 | 4.00 | 0.60 |
| FIP02T | 9.50 | 5.50 | 0.80 |
| FIP00T | 11.00 | 7.00 | 0.80 |
PTFE/ FEP Dual Wall Heat Shrink Sleeving Sizes