header_linkedin.png header_twitter.png               header_UKflag.png header_Frflag.png header_Germanflag.png header_Spflag.png

The use of Tedlar® gas sample bags for gas testing

News_Tedlar_Bags.jpg

In critical environmental applications where contamination of either the bag or its contents must be kept to a minimum, our gas sampling bags are the perfect solution.

Designed and manufactured for this very purpose, our Tedlar® bags are made from carefully selected fluoroplastic films and produced in extremely clean conditions. For more specific applications, particularly emission, VOC, breath and landfill gas testing, why not try Adtech’s Tedlar® bags.

Tedlar® gas sampling bags & emission testing:

Our Tedlar® gas sampling bags are suitable for the testing of gas, odour, automotive and landfill emissions.

Today, emission testing is vital for our health and wellbeing. VOC’s (volatile organic compounds) such as benzene, acetone, ethanol and formaldehyde are highly common but, if inhaled over a long period of time, run the risk of increasing your health problems. Studies have shown that exposure to VOC’s are particularly dangerous to those with asthma or a sensitivity to chemicals.

Landfill gas is a natural process, however in high volumes poses a threat to the community and the environment because it can cause fires and explosions. Automotive emissions are the main cause of air pollution worldwide. These pollutants cause smog in the air and respiratory issues in those who inhale excessive amounts.

That’s why emission testing is vital, and Adtech’s gas sampling bags the best solution.

Why use Adtech’s Tedlar® bags?

  • Chemically inert – will not react with or alter the composition of collected chemicals in your sample

  • Impermeable and abrasion resistant

  • Easily cleaned for re-use by gas flushing

  • Range of inert connectors for ease of use

  • Large capacity chambers – from 3-60 litres (but can measure larger for specialist applications)

  • No plasticisers – excellent aging properties

  • Wide working temperature range – from -70 °C to +107 °C

Adtech’s Tedlar® bags come in a wide range of sizes and can be made with special designs to meet more unusual requirements.

Here at Adtech, we are specialists in delivering innovative fluoropolymer solutions for your technical applications. Find out more about our Tedlar® Gas Sample Bags.

Share this article:

Related News Articles

Cut_pieces_with_fittings_flanges_flares.jpg
With value-added services, you can create bespoke fluoropolymer tubing profiles that fit your applications precisely.
PTFE_Heat_Shrink_Panel_Dual_wall_heat_shrink.jpg
PTFE/ FEP dual wall heat shrink fully encapsulates and protects components. So, why use dual wall heat shrink?
News_Gas_Bags.jpg
Tedlar, FEP and PVC are widely used to make gas sample bags. But which thermoplastic is best suited to your application?
Latest articles
Follow us

Get the latest Adtech updates in your news feed.

Subscribe to the newsletter

Receive the latest Adtech news straight to your inbox.
By signing, up you agree to our privacy policy. You may unsubscribe at any time.